Inhal

For many years there has been a dust problem for the countries of midle east the main source of fine dust is the north wind in Iran ,Also, the construction of dams, changes in the ecosystem and climate, The phenomenon of dust has destructive effects on the environment, the health of living organisms, the economy, etc.
In the Inhal project, We came up with a suitable answer by taking inspiration from the main source of this phenomenon (movement of particles by wind). wich ,absorb Dust particles before entering residential areas Through the force of magnetic field and electricity and transfer to air purification stations
One of the main features of this plan is that it controls dust particles not at the source but at the destination and prevents dust from entering the cities.
This project consists of two parts, stations and receivers:
The stations are responsible for launching the receivers and discharging the dust absorbed by them, and they use a strong magnetic source. After absorption, the dust goes to the storage section of the stations and is recycled for use in brick factories
The receivers have four-axis movement as well as rotation around them, they have electric and magnetic fields that attract dust.
They are Immobile in the stations in clean air, When dust enters, they are activated by dust-sensitive sensors and fly towards the dust and absorb pollution in wide radii.
After absorbing the dust, they return to their stations and discharge the pollution
Then the stations will start the initial setup and receivers will move towards the storm again, This process will continue until the air is completely cleared.

This project consists of two main parts: stations and receivers

The stations: are responsible for launching the receivers and discharging the dust absorbed by them, and they use a strong magnetic source. Their magnetic source is much stronger than the magnetic source of receivers because it has to swallow the dust attracted by them
The basis of the work of stations is based on electricity and charging a non-conductive object, and it is different from ionization and does not have any pollutants.
After absorption, the dust goes to the storage section of the stations and is recycled for use in brick factories

The receivers: have four-axis movement as well as rotation around them, they have electric and magnetic fields that attract dust.
The receivers themselves consist of two part: The central part and the hanging rings around it
The central part has two shells and acts like a balloon, and its role is to gain height and store and receive energy, the hanging rings During the storm rotate around themselves and attract dust around their magnetic field.
receivers Immobile in the stations in clean air, When dust enters, they are activated by dust-sensitive sensors and fly towards the dust and absorb pollution in wide radii.
After absorbing the dust, they return to their stations and discharge the pollution
Then the stations will start the initial setup and receivers will move towards the storm again, This process will continue until the air is completely cleared

Study site: Ilam city, located in the west of Iran, one of the countries located in the center of the dust belt of the northern hemisphere.