University Design Standards
Rutgers University's Design Standards Manual was prepared for architectural and engineering consultants, contractors, and university staff involved in design, new construction, and renovation of university facilities, systems, and properties.

The Design Standards Manual provides both general guidelines and specific requirements for design and specification of materials, systems, and components of facilities. Prior to construction, all designs for repair, renovation, alteration, and new construction are reviewed by the Office of Planning and Development and reviewed and signed by the University Architect.

Both state and university agencies are responsible for review and approval of various elements of planning for all university projects. The office of Architecture and Design must review and approve all modifications to university buildings.

Design Standards Manual
Preface
Part I
General Administrative Procedures
Part II
Bidding Documents
Part III - TOC - Technical Requirements of Materials & Methods of Construction
Division 1 - General Requirements
Division 2 - Existing Conditions
Division 3 - Concrete
Division 4 - Masonry
Division 5 - Metals
Division 6 - Wood and Plastics
Division 7 - Thermal and Moisture Protection
Division 8 - Openings
Division 9 - Finishes
Division 10 - Specialties
Division 11 - Equipment
Division 12 - Furnishings
Division 13 - Special Construction
Division 14 - Conveying Systems
Division 22 - Plumbing
Division 23 - Heating, Ventilating, Air Conditioning
Division 26 - Electrical
Division 27 - Communications
Division 31 - Earthwork
Division 32 - Exterior Improvements
Division 33 - Utilities
Part IV - Design Details
SK-1: Standard Construction Sign
1. PDF Drawing
SK-2: Concrete Curb, Granite Block Curb
SK-3A: Bicycle Rack Pad, Cora W7510 Installation
SK-3B: Installation Guide Cora Expo "W" Series
SK-4: Single Stem Deciduous Tree 1-1/2" to 2-1/2" Caliper
SK-5: Conifer Planting Detail
SK-6: Multi-Stemmed Deciduous Tree Planting Detail
SK-7: Shrub Planting Detail
SK-8: Building Edge Detail
SK-9: Ground Cover Spacing Detail
SK-10: Sanitary Manhole Detail
SK-11A: Standard Ext. Lighting 12" Fixture Foundation
SK-11B: Standard Ext. Lighting 25" Fixture Foundation
SK-12: Vehicle traffic Area Light Pole Footing
SK-13: Concrete Pad for Multiple Dumpsters
SK-14: Fire Safety Plan
SK-15: Cover Sheet--REMOVED, superseded by CAD Standards
SK-16: Elevator Wall Casing
SK-17: Conduit Feeds From Telco Underground
SK-18: Conduit Feed From Pole
SK-19: Typical Manhole (Electrical)
SK-20: Manhole Frames, Covers, Ladders
SK-21: Racking Detail
SK-22: Riser Entrance and Pullbox Size
SK-23: Splayed Duct Entrance Manhole
SK-24: Rutgers Standard Title Block - REMOVED, superseded by CAD Standards
SK-26: Concrete Sidewalk Scoring Plan
SK-27: Concrete Sidewalk Detail, Joining Detail
SK-28: Roof Components Chart
SK-29: Standard Removable Bollard
Part IV - Design Details
SK-1: Standard Construction Sign
1. PDF Drawing
SK-2: Concrete Curb, Granite Block Curb
SK-3A: Bicycle Rack Pad, Cora W7510 Installation
SK-3B: Installation Guide Cora Expo "W" Series
SK-4: Single Stem Deciduous Tree 1-1/2" to 2-1/2" Caliper
SK-5: Conifer Planting Detail
SK-6: Multi-Stemmed Deciduous Tree Planting Detail
SK-7: Shrub Planting Detail
SK-8: Building Edge Detail
SK-9: Ground Cover Spacing Detail
SK-10: Sanitary Manhole Detail
SK-11A: Standard Ext. Lighting 12" Fixture Foundation
SK-11B: Standard Ext. Lighting 25" Fixture Foundation
SK-12: Vehicle traffic Area Light Pole Footing
SK-13: Concrete Pad for Multiple Dumpsters
SK-14: Fire Safety Plan
SK-15: Cover Sheet--REMOVED, superseded by CAD Standards
SK-16: Elevator Wall Casing
SK-17: Conduit Feeds From Telco Underground
SK-18: Conduit Feed From Pole
SK-19: Typical Manhole (Electrical)
SK-20: Manhole Frames, Covers, Ladders
SK-21: Racking Detail
SK-22: Riser Entrance and Pullbox Size
SK-23: Splayed Duct Entrance Manhole
SK-24: Rutgers Standard Title Block - REMOVED, superseded by CAD Standards
SK-26: Concrete Sidewalk Scoring Plan
SK-27: Concrete Sidewalk Detail, Joining Detail
SK-28: Roof Components Chart
SK-29: Standard Removable Bollard
Part V - Sample Specifications
Sample 01028 - Schedule of Values
Sample 01400 - Quality Control
Sample 02071 - ACRM Removal
Sample 02072 - ACRM Flashing Removal
Sample 07220 - Roofing Insulation
Sample Asbestos Affidavit
Sample Fire Safety
Exterior and Interior Signage Manual
Affirmative Action Form
Design Standards Receipt and Variation Request Form

2014

University of Guilan
competition proposal
Design entrance
climatic design
Transparent idea

Amin Shahamipour